Technisat TechniStar K2 ISIO Manual do Utilizador descarregar pdf (Página 11)

Searching for stations

To search for a station:

> Using the up / down arrow keys, select "All Channels"

if you want to search for all encoded and uncoded channels or "All

Uncoded Channels" if you you want to search for public channels.

> The green function key is used to search

all channels automatically.

Software updates

Once the antenna set-up is complete, the digital receiver checks for all available

updates for the device. Any available updates can be performed automatically.

Channel search / ISIPRO (where available)

You have various options for searching for new channels or updating the channel list. You

can use the ISIPRO channel list function to download a new channel list for your receiver

from the satellite or run a channel search.

> To download an up-to-date channel list, use the up/down arrow keys to highlight

the ISIPRO - service list update item.

> To download the available current channel list, use the up/down arrow keys to

highlight the ISIPRO - service list update item and start the process by pressing

the OK button.

The current channel list will now be downloade d via satellite. Please observe

subsequent screen display s and notes.

> If you want to run a channel search via satellite instead of updating the channel list,

or if the DVB-S reception signal has not been configured, use the up/down arrow

keys to highlight the All channels or All unencrypted channels field, then

start the channel search process by pressing the OK button.

In this search, all selected satellites in the antenna configuration are automatically

scanned for channels. This procedure may take several minutes. Please take note of

note all messages displayed on the screen.

If the channel search/channel list update has been skipped, the default channel list is loaded.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Sem comentários

Technisat TechniStar K2 ISIO Manual do Utilizador Página 11